How to Cull & Edit Wedding Photos Faster: 5 Tips We Actually Use

By Dan and Laura Pinckard, destination wedding and elopement photographers. Last reviewed November 2026.

Heads up: In this post we talk about Narrative. We are Narrative ambassadors and do earn commission from sign-ups using our affiliate link, but every opinion here is ours. We use the platform for every single client gallery and strongly recommend it.

It’s the end of busy season. You’ve got a long list of galleries to deliver, a calendar that finally has space in it, but zero desire to sit down and compare twelve almost identical photos of the same hug.

We’ve been there. Laura is an overshooter (her words), and she says it used to take her at least five hours to cull a wedding. Dan will tell you it was closer to ten or fifteen hours on a big one with both of us shooting.

Either way, it was too long. Here’s what changed.

What is the fastest way to cull wedding photos?

The fastest way to cull wedding photos is to stop making every decision on the first pass. Do one quick pass for the obvious rejects and clear winners, let software (like Narrative) group near-duplicates and check focus and eyes, then spend your real attention on the hard calls. Most of the time you lose culling isn’t spent on hard decisions. It’s spent making the same easy decision over and over again.

The other half of the answer happens before you ever sit down at your computer. If you flag the important frames in camera and take fewer near-identical portraits, there’s simply less to sort.

Here are the five things we’d encourage you to try doing to speed up your own workflow.

Tip 1: Stop making every decision on the first pass

Cull in passes, and give each pass one job. When you try to fully decide on every image as it comes up, you end up zooming in and comparing frames that are basically identical, and you burn your decision-making energy on the photos that matter least.

Try this instead:

  1. Pass one, the fast one. Reject the obvious misses and mark the clear favorites. If you’re stuck for more than a second or two, skip it. You’re not choosing yet.
  2. Pass two, the comparisons. Now go through the groups of similar frames and pick. This is where a tool that shows faces close-up, a focus rating, and a quality score really helps.
  3. Pass three, the story. Look at what’s left as a gallery. Do you have the moments you need? Is anybody missing? Does the day flow?

The point isn’t the number of passes. It’s that the hard decisions are easier when you’ve already cleared the easy ones out of the way.

There’s a reason this matters for more than speed. Laura has talked about how going through a wedding is how she relives it. She’ll remember an idea she had for a double exposure, or why she kept a frame she wanted to turn black and white. A rushed, all-at-once cull loses that. Passes let you move fast through the repetitive parts and slow down for the creative decision-making.

That’s one of the big reasons we don’t use tools that automate culling. We want to do it faster (and Narrative is great for that), but we need to be involved in the process. That’s not optional. Which leads me to the next point…

Tip 2: Use AI to assist with culling without giving up creative control

AI is great at the repetitive part of culling and bad at knowing why you took the photo. So give it the first job and keep the latter one.

Our rule is simple: we want technology to eliminate repetitive work, not make our artistic decisions. That’s true when taking pictures, culling, editing, social media, our website.

We use Narrative for culling and the initial edit. When you import a shoot, it groups similar photos into Scenes, and it can show you close-ups of every face in the frame with eye and focus assessments, so you’re not zooming in and panning around fifteen near-identical group shots to find out who blinked. Its AI First Pass then compares each photo with the others in that Scene and ranks/sorts it into one of five categories, from Best in Scene down to Undesirable.

One important thing to pay attention to (because other platforms differ here) is that Narrative never automatically rejects, deletes, or “culls” a photo out of your gallery. It’s an opinion with information to help you decide. You can ignore it if you want.

How Laura actually uses it (it’s a little backwards)

Laura does this in reverse. She goes straight to the photos Narrative rated Average, Below Average, and Undesirable, and decides whether she agrees. She doesn’t start with the ones it likes, because in her experience it’s reliable about what’s in focus and whose eyes are open. Where it can’t be reliable is on what she was trying to do.

If she made a frame blurry on purpose, it’s probably sitting in the lower categories, because it’s not a technically correct photograph. So that’s where she goes looking for it.

That’s the whole philosophy in one habit. A technically imperfect image can still be the most important photo in a gallery:

  • Intentional motion blur. To software, that’s a mistake. To us, it might be the whole feeling of the dance floor.
  • A double exposure in progress. Laura will sometimes keep a frame only because she can see what it’s going to become in Photoshop later. Nothing analyzing that image knows that she has a plan for it.
  • The emotional frame over the sharp one. Sometimes the shot with the slightly soft focus is the one where the dad actually lost it, or you can spot a tear running down grandma’s cheek. That’s the keeper, and no sharpness score is going to tell you that.

Sometimes software flags a photo as an unlikely pick and our reaction is “wait, watch me make this cool.” That’s a relationship with AI we actually enjoy.

What “automated” means here

Narrative does have automation if you want it. You can make First Pass stricter or more relaxed with its Ruthless, Balanced, and Cautious settings, and there’s an optional Auto-rate with First Pass command that applies ratings or color labels for you based on those assessments. So this isn’t a tool that refuses to automate. We just don’t hand it the final selection, and if you’re photographing weddings for people who are paying for your eye, we don’t think you should either.

Whichever software you use, the question isn’t how much AI it has. It’s which parts of your process you actually want it to touch.

We switched to Narrative because we wanted to spend less time comparing photographs while keeping control over the creative decisions. If that’s what you’re after too, here’s the software we use.

Tip 3: Stop editing every photo individually

Group photos by light, build one great base edit, sync it, and only then do the individual refinements. Instead of editing the first photo, then trying to match photo #2 to it, then repeating on #3, and again on a thousand more photos… Batch your work for more speed and better consistency.

Here’s the Lightroom Classic version:

  1. Sort by capture time. Weddings are basically chapters of light: getting ready, ceremony, portraits, reception.
  2. Edit one strong image from a chapter. Get it where you want it. If you’ve got a few shots you use as a reference point for a look, Reference View lets you compare against one while you edit.
  3. Sync it across that chapter. Select the rest, and use Sync to choose which settings to carry over, or Auto Sync if you want your slider moves to apply to every selected frame as you go.
  4. Fix exposure drift. If the light was shifting and you were riding your exposure, Match Total Exposures evens a selection out against your active photo.
  5. Then go image by image. Crops, the small color calls, anything that needs a human.

Where AI fits: we apply an AI Preset when we send our selects from Narrative to Lightroom, so they arrive with a base edit already on them. It’s better than a standard preset, because AI is actually analyzing the photos instead of just applying predetermined adjustments, but the images still need a human touch. Every single final image still goes through Laura’s hands in Lightroom.

Tip 4: Flag your favorite photos in-camera

If you know you just nailed it, rate it right there on the back of your camera. Future you, staring at 6,000 files, will have a head start on the images you were most excited about.

We shoot Nikon, and on the Z6III there are two ways to do it, per Nikon’s manual:

  • The slow way: in playback, press the i button, highlight Rating, then rotate the main command dial to choose zero to five stars.
  • The fast way: assign Rating to a control using Custom Setting f3 (Custom controls, playback). Then you can hold that control and rotate the main command dial to rate.

Set it up the fast way. If it takes more than a second, you won’t do it at a wedding.

Narrative and Lightroom will both keep those ratings, so you can find the most important shots immediately without having to try to remember your favorites from the day.

Tip 5: Stop overshooting and start photographing more intentionally

Before you take a posed portrait, stop and fix the picture instead of hoping one of forty frames fixes it for you. A faster workflow starts before you ever sit down at your computer.

When you’ve got a couple in front of you and you’re in control of the moment, take a second and check:

  • Posing. Is anything awkward or stiff that you could fix by having your subject move?
  • Composition. Are you happy with the frame, or are you planning to crop the shit out of it later?
  • Light. Is it doing what you want, or are you going to have to manually adjust everything in post?
  • Distractions. Is there a trash can, a sign, or a stray guest you could solve by moving two feet?

Thirty seconds of that saves you from comparing thirty near-duplicates later.

Now the important part: this only applies to moments you control. During a ceremony, a toast, or a dance floor, you don’t get a do-over, and shooting continuously can be exactly the right call. Laura will happily admit she overshoots, and in unpredictable moments that isn’t a flaw.

So the goal isn’t fewer photographs. It’s fewer unnecessary photographs.

Our actual wedding photo workflow, start to finish

Here’s what the whole thing looks like when it’s all put together. Laura does the culling and final editing.

  1. In camera: rate the frames we know are special, and slow down on directed portraits.
  2. Import into Narrative: culling and AI assessments run on the computer, not in the cloud, so we’re not waiting on an upload.
  3. Review in Scenes View: Laura works through the lower-rated frames first and keeps what the software couldn’t understand.
  4. Check coverage: the People Filter and Close-ups panel make it quick to see whether we’ve got enough of the people who matter. The Close-ups panel is especially good for family formals. They need everyone’s eyes open, so we usually take 15 of the same shot just in case.
  5. Ship to Lightroom with an AI Preset applied.
  6. Finish in Lightroom: batch by light, then final crops, color, and retouching by hand.
  7. Deliver: a few dozen sneak peeks within a week and the full gallery within 10 weeks.

What to look for in wedding photo culling software

If you’re shopping around, here’s what actually matters for wedding work:

  • Can you see faces without zooming? Group photos are where culling time goes to die.
  • Does it group near-duplicates well? Scene grouping is what turns thousands of decisions into hundreds.
  • Do you stay in control? Check whether it recommends, decides, or lets you choose. And make sure nothing gets deleted without you.
  • Where do your photos go? Some tools process locally and some upload to the cloud. Neither is automatically wrong, but you should know which one you’re using, since these are your clients’ private moments.

Why we use Narrative

Like I said in the beginning of this post, we are Narrative ambassadors, but we weren’t always. We tried it in 2025, went with a different tool for a while, and came back to it in 2026. Laura wrote the full story of that decision over on Shoot Bigger.

The short version is that it fits how we want to work. It handles the technical questions (is it sharp, are their eyes open, which of these is the best version) and leaves the story to us. If you want the details, including what it doesn’t do well, we wrote a full Narrative Select review. If you’re deciding between tools, here’s our Narrative vs Aftershoot comparison.

Frequently asked questions

How long does it take to cull a wedding?

It depends on how much we shoot and how many photographers were there. Before using Narrative, Laura remembers it taking at least five hours before she changed her workflow, and Dan would say closer to 10-15 on a big wedding with both of us shooting. With Narrative, it takes probably 1-3 hours total for a wedding.

Should you cull wedding photos in one pass?

We wouldn’t. A single pass forces you to make easy and hard decisions at the same time. Two or three focused passes are usually faster, and they’re a lot less exhausting. Yes, it means looking at the same photos multiple times, but when you take 5 times longer hyper-analyzing them in the one pass, it probably makes sense to split it up.

What is AI photo culling?

AI photo culling is software that analyzes your photos for things like focus, closed eyes, and near-duplicates, then helps you sort them. Depending on the tool, it either gives you information while you choose or makes a first selection for you to review. Some platforms even have a fast-track feature that sends them straight to editing without human review, which we strongly discourage.

Can AI cull photos without making all the decisions?

Yes, and that’s how we use it. Narrative’s First Pass, for example, assesses and ranks photos, but a low assessment never rejects or deletes anything. You make the final selection, while AI is giving you resources to make it faster.

Can you rate photos in-camera?

Yes, many cameras let you. On the Nikon Z cameras you can rate during playback from zero to five stars through the i menu, or assign Rating to a button with Custom Setting f3. Check that your culling software reads those ratings before you depend on them.

How do you cull in Lightroom?

Lightroom works fine for culling by hand using flags and star ratings, and Adobe has also added an Assisted Culling feature. The trade-off we’ve found is speed: a dedicated culling app is built to move between RAW files instantly, which is why we cull first and bring only our selects into Lightroom.

The short version

If you only change one thing, stop making every decision on the first pass. If you change two, let software handle the repetitive checks and keep the final call for yourself.

The goal isn’t to let software make your artistic decisions. It’s to spend less time on repetitive work so you have more time and energy for the creative decisions that actually matter.

Want to try the workflow on your next gallery?

Narrative has a free trial of its top plan, no card needed. If you stick with it, our link gets you 10% off.